Cabrio L4-2.0L (ABA) (1996)
Timing Belt: Specifications
Timing Components
1 - Tensioner
2 - Bolt
- Tightening torque: 25 Nm (18ft lb)
- For mounting bracket -11-; 35 Nm (26 ft lb)
3 - Tensioning lever
4 - Dust sleeve
5 - 10 Nm (7ft lb)
6 - Drive belt guard, lower
7 - Drive belt guard, upper
8 - 45 Nm (33 ft lb)
9 - Tensioner pulley
10 - Drive belt
- Before removing mark running direction
- Check for wear
- Do not kink
11 - Mounting bracket
12 - Drive belt guard
13 - Drive belt guard, rear
14 - Drive belt sprocket, intermediate shaft
15 - 80 Nm (59ft lb)
- To loosen and tighten use holding fixture 3036
16 - Drive belt sprocket, crankshaft
17 - 90 Nm (66ft lb) plus 1/4- turn (9O °)
- Always replace
- To loosen and tighten use special tool 3099