Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Tighten bolt - arrow - for shock absorber.
Only install bolted connections on wheel bearing housing if dimension "a" is reached!
-
Install coil spring.
-
Tighten bolt for tie rod - 1 -, upper transverse link - 2 - and lower transverse link - 3 -.
-
Tighten nut for coupling rod - arrow -.
-
Tighten bolts - arrows -.
-
Install cover plate.
-
Install wheel bearing/wheel hub unit.
-
Install ABS wheel speed sensor in wheel bearing housing.
-
Install brake disc.
-
Install brake carrier with brake caliper.
-
Install wheel and tighten.