Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1173005.png)
‹› For pistons that are difficult to press in, a 13 mm open end wrench can be used at the location - arrow A - on the resetting & extracting tool ( T
10165 ).
-
Insert the brake pad anti rattle springs - arrows - and brake pads to the brake carrier.
-
Make sure that the brake pads are located correctly in the anti rattle springs - arrows -.
-
Secure the brake caliper using the new self locking bolts.
‹› The repair kit includes four self locking bolts which must be installed in ALL cases.
