Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Engine, Cooling and Exhaust > Engine > Actuators and Solenoids - Engine > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster Valves > Page 1805

Page 10
background image

-

Now install the exhaust camshaft adjuster "32A" positioned with the tooth at the mark - 1 - into the camshaft timing chain so that the exact,
previously counted 16 rollers lie between marks "24E" and "32A".

-

Install the camshaft adjuster 32A with the camshaft timing chain installed onto the exhaust camshaft. Note the following:

‹› The arrow - 1 - on the camshaft adjuster 32A must align with the notch - 2 - on the right side of the control housing. Marks on control housing,

refer to => [ Marks on Control Housing ] See: Cylinder Head Assembly/Testing and Inspection.

‹› the exhaust camshaft adjuster must be able to be installed easily onto the exhaust camshaft and the bolt be tightened hand tight.

-

Check the position of both camshaft adjusters one more time for correct adjustment.

Engine, Cooling and Exhaust > Engine > Actuators and Solenoids - Engine > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster Valves > Page 1805

[PREV PAGE] [NEXT PAGE]