Volkswagen Workshop Manuals
Eos (1F7) V6-3.2L (BUB) (2008)
Engine, Cooling and Exhaust > Engine > Actuators and Solenoids - Engine > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster Valves > Page 1806
Remove the (T10068 A).
‹› When rotating the crankshaft, the tensioning rail must be pressed by hand against the camshaft timing chain at the chain tensioner, so that the
camshaft timing chain does not jump over!
Rotate the crankshaft twice in engine rotation direction and check the valve timing. Refer to => [ Vehicles from 12.08 ] See: Cylinder Head
If the marks match:
Secure the respective camshaft to be tightened using a 32 mm open end wrench on the recesses - arrow -.
|[PREV PAGE] [NEXT PAGE]|