Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Power and Ground Distribution > Wiring Harness > Component Information > Service and Repair > Procedures > Page 5019

Page 5
background image

  ‹› When doing this, the smaller diameter of single wire seal must be facing in the direction of the contact to be crimped on.

-

Open crimp pliers and place the repair wire end into stripping slot of crimp pliers.

-

Close crimp pliers completely.

-

Open crimp pliers again and remove the stripped wire end.

-

Slide single wire seal in direction of stripped wire end until it rests flush with the wire insulation.

Power and Ground Distribution > Wiring Harness > Component Information > Service and Repair > Procedures > Page 5019

[PREV PAGE] [NEXT PAGE]