Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Steering and Suspension > Suspension > Strut / Shock Tower > Front Strut / Shock Tower > System Information > Service and Repair > Removal and Replacement > Page 5611

Page 2
background image

1.  (VW 418 A)

2. Mounting bracket with bonded rubber bushing

3. Wishbone

4.  (VW 401)

Suspension Strut

Suspension Strut

‹› Adaptive chassis DCC suspension strut, removing and installing, refer to => [ Suspension Strut ] See: Self-Leveling Suspension.

Special tools, testers and auxiliary items required

‹› Torque wrench (V.A.G 1332)

‹› Spreader (3424)

‹› Engine/transmission jack (V.A.G 1383 A)

‹› Wheel Hub Support (T10149)

Removing

-

Loosen drive axle bolt to wheel hub:

‹› Hex head bolt, refer to => [ Drive Axle Hex Bolt Connection, Loosening and Tightening ] See: Wheel Hub/Axle Nut/Service and Repair/Removal

and Replacement. 

‹› Twelve point bolt, refer to => [ Drive Axle Twelve-Point Bolt, Loosening and Tightening ] See: Wheel Hub/Axle Nut/Service and

Repair/Procedures.

‹› Vehicle must not be standing on its wheels when doing this, otherwise wheel bearing will be damaged.

-

Remove wheel.

Steering and Suspension > Suspension > Strut / Shock Tower > Front Strut / Shock Tower > System Information > Service and Repair > Removal and Replacement > Page 5611

[PREV PAGE] [NEXT PAGE]