Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Steering and Suspension > Wheels and Tires > Wheel Bearing > Component Information > Service and Repair > Procedures > Page 5832

Page 1
background image

Wheel Bearing: Removal and Replacement

Wheel Bearing Unit

Wheel Bearing Unit

Special tools, testers and auxiliary items required

‹› Torque wrench (V.A.G 1332)

Removing

-

Loosen drive axle bolt to wheel hub:

‹› Hex head bolt, refer to => [ Drive Axle Hex Bolt Connection, Loosening and Tightening ] See: Wheel Hub/Axle Nut/Service and Repair/Removal

and Replacement. 

‹› Twelve point bolt, refer to => [ Drive Axle Twelve-Point Bolt, Loosening and Tightening ] See: Wheel Hub/Axle Nut/Service and

Repair/Procedures.

‹› Vehicle must not be standing on its wheels when doing this, otherwise wheel bearing will be damaged.

-

Remove wheel.

-

Remove brake caliper and engage on body with wire.

-

Remove ABS wheel speed sensor.

-

Remove disc brake.

Only Vehicles with Drive Axle VL100

-

Press the drive axle out of the hub as far as possible (in direction of transmission).

-

Remove bolts - arrows -.

-

Remove wheel bearing unit from wheel bearing housing.

Continuation for All Vehicles

-

Remove nuts - arrows -.

Steering and Suspension > Wheels and Tires > Wheel Bearing > Component Information > Service and Repair > Procedures > Page 5832

[PREV PAGE] [NEXT PAGE]