Volkswagen Workshop Service and Repair Manuals

The replacement flywheel/drive plate has only the mark -0- to indicate TDC.Should the flywheel or drive plate be renewed, an appropiate timing notch must be made.

Engine Code: EG

• ‒ → Make a notch for ignition timing at distance -a- to left of center of the TDC mark -0-.

Engine Codes: DX, JH, JJ, KT, 2H

• ‒ → Make the notch for ignition timing at distance -a- to left of the center the TDC mark.The distance is to be measured along the curvature.