volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing fuel pump, fuel filter, and pressure accumulator (engine codes: DX and KT 2/84 >, JH) > < Removing and installing fuel tank with ancillary components (2/84 >, 55-litre fuel tank)

Golf Mk1

4 Cyl injection engine (2 valve), Mechanics
Removing and installing fuel system components
Removing and installing fuel pump, fuel filter, and pressure accumulator (engine codes: DX and KT > 1/84, EG JJ)
 
U20-0024

Notes:

  • ◆ Always renew sealing rings during repairs.
  • ◆ Hose connections are secured either with spring clips.
  • ◆ Observe rules for cleanliness .
  • ◆ Checking fuel pump relay=> page 20-41 .
  • ◆ Installation position of fuel filter => page 20-20 , fig.1 .
 
U20-0024
  • ◆ Renewing fuel filter check valve=> page 20-20 , fig.2 .
  • Check valve, 20 Nm
    • ◆ Checking => page 20-38 .
  • Fuel pump
    • ◆ Checking => page 20-24 .
  • Bracket
  • 10 Nm
  • Pipe from fuel tank
  • Pipe to fuel filter
  • Pressure accumulator
    • ◆ Different versions
           Note part number

Removing and installing fuel pump, fuel filter, and pressure accumulator (engine codes: DX and KT 2/84 >, JH) > < Removing and installing fuel tank with ancillary components (2/84 >, 55-litre fuel tank)