Volkswagen Workshop Service and Repair Manuals > Golf Mk3 > Body | Body self-diagnosis | Self diagnosis, V.A.G Inspection Service | Airbag system self-diagnosis 09.94 ?

Reading measured value block

WARNING

Only visual check of wiring!

Do not carry out electrical continuity tests or measurements to ignition circuits!

Only check wiring with ignition switched off!

–	Connect fault reader → Chapter.

–	Switch on ignition.

–	Press key -1- for “rapid data transfer” mode.

Indicated on display:

–	Press keys -1- and -5- (the address word of the vehicle system to be tested “Airbag” is entered with 15).

Rapid data transfer                 HELP

Input address word XX

Indicated on display:

–	Confirm entry with the Q key.

The airbag warning lamp -K75- is permanently lit.

Rapid data transfer                   Q

15 Airbag

Indicated on display (see parts catalogue for latest control unit version).

–	Press → key.

1J0 909 608 A  AIRBAG VW 3 S      V03 ->

Coding 00065                   WSC12345

Indicated on display:

–	Press keys -0- and -8- (08 initiates the “Read measured value block” function).

Rapid data transfer                 HELP

Select function XX

Indicated on display:

–	Confirm entry with the Q key.

Rapid data transfer                   Q

08   Read measured value block

Indicated on display:

–	Select desired display group number and confirm entry with Q key.

Read measured value block           HELP

Enter display group number XX

Indicated on display:

To decode display content in individual display fields, refer to interpretation of display group number → Chapter.

If the displayed values in all display zones are “correct”:

–	Press → key.

Read measured value block 1

  1   2   3   4

Indicated on display:

Note

When “Read measured value block” function is ended, read fault memory → Chapter.

Rapid data transfer                 HELP

Select function XX

Volkswagen Workshop Service and Repair Manuals