Removing and installing rear bumper
- Make
- Volkswagen
- Model
- Golf Mk3
- Section
- Bumper › Rear bumper › Removing and installing rear bumper
BodyRemoving and installing rear bumper
| Removing and installing rear bumper |
| 1 - | Bumpers |
| q | Cover: Material: PP/EPDM. |
| q | Removing: |
| – | Open rear lid. |
| – | Lever off covers → Item or cover strip → Item. |
| – | Screw out hexagon bolts → Item and pull the bumper out of the side guides → Item. |
| 2 - | Hexagon nut |
| q | 25 Nm |
| 3 - | Bumper carrier |
| q | 02.94 ► |
| 4 - | Deformable element |
| q | ► 02.94 |
| 5 - | Guide |
| 6 - | Sealing washer (plastic) |
| 7 - | Cover / tow lug |
| 8 - | Hexagon head bolt |
| q | 4.5 Nm |
| 9 - | Cover / tow bar |
| 10 - | Cover / upper hexagon bolts |
| 11 - | Cover / upper hexagon bolts |
Parts & tools for this job For Volkswagen Golf
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Volkswagen touch up paint
- PARTPanel clip assortmentSearch: Volkswagen panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.