Golf Mk3
Removing and installing left luggage compartment trim (Estate) |
1 - | Clip |
q | Two-piece. |
q | Removing: unscrew inner part with hexagon socket head wrench |
q | Installing: press outer part and inner part in turn into mounting hole |
2 - | Clip |
3 - | Clip |
q | Fitted to flange (side window) |
4 - | Securing point |
q | For clips → Item |
5 - | Trim panel |
q | Removing: |
– | Remove rear bench seat and backrest . |
– | Remove luggage compartment cover → Chapter. |
– | Remove upper B-pillar trim → Item. |
– | Remove upper C-pillar trim → Chapter. |
– | Remove lower C-pillar trim → Chapter. |
– | Remove D pillar trim panel → Chapter. |
– | Removing load sill cover → Chapter. |
– | Remove cross-head screw → Item. |
– | Remove lid → Item and clips → Item. |
– | Unscrew hexagon nuts → Item. |
– | Pull trim with securing peg → Item at right angles out of clip → Item and pull upwards out of clips → Item. |
q | Installing: |
– | Check the seating of the clips → Item and → Item and correct if necessary. |
– | Make sure the sealing on the rear lid is seated correctly. |
6 - | Hexagon nut |
7 - | Lid |
8 - | Cross-head screw |
9 - | Securing peg |
q | On rear |