Golf Mk3
|
| 1 - | Gearbox housing |
| 2 - | Shim |
| q | Additional 3.7 mm thick shim for -B1- with 4 inner plates through gearbox manufacture date “16 8 2” → Item |
| 3 - | Outer plate -B1- |
| q | Quantity → Chapter |
| 4 - | Inner plate -B1- |
| q | Quantity → Chapter |
| 5 - | Pressure plate |
| q | Install with flat side facing plates. |
| q | Various thicknesses depending on number of inner plates installed: |
| Gearbox with 4 inner plates |
| q | Through gearbox manufacture date “16 8 2”: 7.5 mm (an additional 3.7 mm thick shim → Item is installed) |
| q | From gearbox manufacture date “17 8 2”: 11.1 mm |
| Gearbox with 5 inner plates |
| q | 7.5 mm |
| Gearboxes from 01.93 → Chapter |
| q | Gearbox with 4 inner plates “13.5 mm” |
| q | Gearbox with 5 inner plates “10.5 mm” |
| Quantity of inner plates -B1- → Chapter |
| 6 - | Dished washer |
| q | Convex side faces freewheel. |
| 7 - | Freewheel with -B1- piston |
Note| Before removing or installing freewheel, remove valve body and take out plugs → Chapter. |
| 8 - | Retaining ring |