Servicing valve gear
Renewing valve stem seals
(with cylinder head fitted)
Special tools, workshop equipment, testers, measuring instruments and auxiliary items required
-
◆ Puller 3047A
-
◆ Assembly tool 2036
-
◆ Lever VW 541/1A with press piece VW 541/5
Valve stem ø 8 mm:
Valve stem ø 7 mm:
Removing
-
‒ Remove camshaft
.
-
‒ Remove bucket tappets (do not interchange) and store with the contact surface downwards.
-
‒ Set piston of respective cylinder to top dead centre (TDC).
|