Removing and installing parts of cooling system
Removing and installing parts of cooling system
Notes:
-
◆ When the engine is warm the cooling system is under pressure. If necessary release pressure before commencing repair work.
-
◆ Hoses are secured with spring-type clips or screw-type clips. In cases of repair spring-type clips can be replaced by screw-type clips.
-
◆ Hose connections are secured with spring-type clips. For fitting the spring-type clips commercial pliers e.g. Hazet 798-5 are recommended.
Draining and filling with coolant
Coolant mixture ratios => Page 19-11
, draining and filling with coolant
Carry out cooling system leakage check with V.A.G 1274 and 1274/3.
|