volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Parts of cooling system - engine side > < Removing and installing parts of cooling system

Golf Mk3

4-Cyl. Injection Engine, Mechanic
Removing and installing parts of cooling system
Parts of cooling system body side
 
V19-0580
  • Retainer
  • 10 Nm
  • Radiator
    • ◆ Removing and installing
      =>Page 19-13
    • ◆ After replacing renew entire coolant
  • V-belt
    • ◆ Only with optional extras
  • Guide ring
    • ◆ Note fitting position
    • ◆ Secured to fan ring item 10 with clips
  • Radiator fan
    • ◆ Removing and installing
      =>Page 19-13
 
V19-0580
  • Upper coolant hose
    • ◆ To connection
      =>Page 19-6 , Item 1
  • Lower coolant hose
    • ◆ To coolant pump
      =>Page 19-7 , Item 16
  • Additional fan
    • ◆ Only with optional extras
    • ◆ Removing and installing
      =>Page 19-13
  • Fan ring
    • ◆ Note fitting position
  • Connector
  • Cover
  • Expansion tank
 
V19-0580
  • To connection
  • To ATF cooler
    • ◆ Only on vehicles with automatic gearbox
  • To cylinder head
  • Cap
    • ◆ Check with V.A.G 1274 and 1274/4
    • ◆ Test pressure 1.3...1.5 bar
 
V19-0580
  • Thermo switch (F18), 35 Nm
    • ◆ For electric fan
    • ◆ Switching temperatures:
      Stage 1
           on: 92...97 °C
           off: 84...91 °C
      Stage 2
           on: 99...105 °C
           off: 91...98 °C
  • Rubber bush

Parts of cooling system - engine side > < Removing and installing parts of cooling system