Golf Mk3
| Exhaust manifold, front exhaust pipe and catalytic converter with attachments - engine codes 2E, ADY, AGG, AKR |
| 1 - | Exhaust manifold |
| 2 - | Bracket |
| q | For air collector plate |
| 3 - | 25 Nm |
| 4 - | Warm air collector plate |
| 5 - | Support |
| q | Between intake manifold and exhaust manifold |
| 6 - | CO measuring tube, 20 Nm |
| 7 - | Cap |
| q | Check for secure seating. |
| 8 - | 30 Nm |
| 9 - | Lambda probe, 50 Nm |
| q | Grease threads only with high-temperature paste -G 052 112 A3-, high-temperature paste -G 052 112 A3- must not get into the slots of probe body. |
| q | Check → Engine mixture preparation; Rep. Gr.24 |
| 10 - | Front exhaust pipe with front silencer |
| q | For vehicles without catalytic converter |
| 11 - | To intermediate pipe |
| q | → Item |
| 12 - | Catalytic converter |
| 13 - | Seal |
| q | Renew |
| 14 - | 10 Nm |
| 15 - | Heat shield |
| 16 - | 40 Nm |
| q | Tightening sequence → Fig. |
| 17 - | Front exhaust pipe |
| 18 - | Seal |
| q | Renew |
|
|