Volkswagen Workshop Service and Repair Manuals > Golf Mk3 > Power unit | 4-cylinder injection engine (2-valve), mechanics | Fuel supply, gas operation | Removing and installing parts of fuel supply system | Removing and installing parts of activated charcoal filter system | Removing and installing parts of activated charcoal filter system (engine codes 2E, ADY, AGG, AKR)

Removing and installing parts of activated charcoal filter system (engine codes 2E, ADY, AGG, AKR)

1 -

Bracket

q	On right wheel housing

2 -

20 Nm

3 -

Connector

4 -	Activated charcoal filter solenoid valve 1 -N80-

q	Valve open in direction of arrow with ignition switched off.

q	When engine is warm, valve will be activated (pulsed) by engine control unit.

q	Check → Engine mixture preparation; Rep. Gr.01.

5 -	Rubber bush

6 -

10 Nm

7 -	Throttle valve housing

8 -	Breather line

q	From gravity valve on fuel tank → Item.

9 -	Activated charcoal filter

q	Location: in front right wheel housing.

q	To remove, push securing tab in direction of arrow