Golf Mk3
| Removing and installing parts of activated charcoal filter system (engine codes AAM, ABS, ADZ, ANN, ANP) |
| 1 - | Connector |
| 2 - | Activated charcoal filter solenoid valve 1 -N80- |
| q | After ignition is switched off valve opens for about 5 seconds |
| q | When engine is warm, the valve will be activated (pulsed) by the Mono-Motronic control unit. |
| q | Check → Engine mixture preparation; Rep. Gr.01. |
| 3 - | Bracket |
| q | On air filter lower part |
| 4 - | Retaining ring |
| 5 - | Injector |
| 6 - | Breather line |
| q | From gravity valve on fuel tank |
| Front-wheel drive → Item |
| Four-wheel drive → Item |
| 7 - | Activated charcoal filter |
| q | Location: in front right wheel housing. |
| q | To remove, push securing tab in direction of arrow |
