volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing brake pedal position sender, RHD

Golf Mk3

Removing
Removing
–  Dissipate vacuum in brake servo by depressing brake pedal several times.
–  Remove intake plenum from mixture formation and throttle valve part with air hose.
–  Pull connector off brake pedal position sender.
   
–  Prise out circlip using a scraper or another suitable tool sufficiently to allow release of sender -arrow- (shown without tandem brake master cylinder for clarity).
–  Pull sender out of brake servo.
  V45-0135

Installing > < Removing and installing brake pedal position sender, RHD