volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Bleeding brake system on vehicles with and without ABS, ABS/EDL > < Removing and installing control and hydraulic units
Running gear
Assembly overview - Hydraulic unit, right-hand drive
Assembly overview - Hydraulic unit, right-hand drive
 
N45-0038

Note:

  • ◆ Pump and valve block must not be separated from one another.
  • Bracket
    • ◆ Is secured to the mounting plate
  • Self-locking nut, 10 Nm
    • ◆ Always renew
  • Rubber damper
  • Self-locking nut, 25 Nm
    • ◆ Always renew
  • Stud, 8 Nm
  • ABS hydraulic unit
  • Brake pipe connection
    • ◆ Hydraulic unit to front left brake caliper
 
N45-0038
  • Brake pipe connection
    • ◆ Hydraulic unit to rear right wheel cylinder/caliper
  • Brake pipe connection
    • ◆ Hydraulic unit to rear left wheel cylinder/caliper
  • Brake pipe connection
    • ◆ Hydraulic unit to front right brake caliper
  • Control unit
  • Heat shield
  • Bolt, 8 Nm
  • Clip
  • Brake pipe
    • ◆ Master brake cylinder/secondary piston circuit to hydraulic unit
  • Brake pipe
    • ◆ Brake master cylinder/primary piston circuit to hydraulic unit

Connecting brake pipes from tandem brake master cylinder to hydraulic unit

 
N01-0013

→ Fig.1    Vehicles with ABS

  •     A -    Secondary piston circuit
  •     B -    Primary piston circuit
  •     1 -    Hydraulic unit to front right brake caliper
  •     2 -    Hydraulic unit to rear left wheel cylinder/brake caliper
  •     3 -    Hydraulic unit to rear right wheel cylinder/brake caliper
  •     4 -    Hydraulic unit to front left brake caliper
 
N01-0014

→ Fig.2    Vehicles with ABS/EDL

  •     A -    Secondary piston circuit
  •     B -    Primary piston circuit

Bleeding brake system on vehicles with and without ABS, ABS/EDL > < Removing and installing control and hydraulic units