Golf Mk3
| Removing and installing column tube for height-adjustable steering wheel |
| The column tube can be adjusted in height by approx. 50 mm. |
| 1 - | Operating lever |
| 2 - | Packing plate |
| 3 - | Column tube |
| q | Square housing fits over mounting bracket. |
| 4 - | Bolt with left-hand trapezoidal thread |
| q | Tighten to 22 Nm, lever on upper stop. |
| q | After tightening fit locking plate. |
| 5 - | Clamping sleeve |
| 6 - | Locking plate |
| 7 - | Locking plate nut, 8 Nm |
| q | Self-locking. |
| q | Renew |
| 8 - | Shear-head bolt |
| q | Tighten until head shears off. |
| 9 - | Washer |
| 10 - | Mounting bracket |
| q | Coat side sliding surfaces with MoS2 paste before assembly. |
| 11 - | Pressure plate |
| 12 - | Packing plate |
| 13 - | Return spring |
| q | Hooked into mounting bracket on column tube. |
| 14 - | Rubber stop |
