Volkswagen Workshop Service and Repair Manuals

Notes:

• ◆ Renew sealing rings.
• ◆ Do not reuse drawn off hydraulic oil.
• ◆ Filling capacity and type of oil => Notes Page 48-110

• Bracket
• ◆ Introduction: From 08.93
• ◆ On vehicles with air conditioner, the mounting bracket can only be removed after first removing the air conditioner mounting bracket

=> Removing and installing compressor bracket - 6-cyl. petrol 08.93 ▸; Repair group 87

• Hexagon socket head bolt,
  M 8 x 30
• ◆ 25 Nm

• Fitted bolt M 8 x 28
• ◆ 25 Nm
• Hexagon socket head bolt,
  M 8 x 38
• ◆ 25 Nm
• Washer
• Fitted bolt M 8 x 20
• ◆ 25 Nm
• Hexagon socket head bolt,
  M 8 x 30
• ◆ 25 Nm
• Hexagon socket head bolt,
  M 8 x 30
• ◆ 25 Nm
• Hexagon bolt, M 8 x 30
• ◆ 25 Nm
• Hexagon socket head bolt,
  M 8 x 20
• ◆ 25 Nm
• Hexagon socket head bolt,
  M 8 x 30
• ◆ 25 Nm

• Hexagon bolt, M 8 x 30
• ◆ 25 Nm
• Belt pulley
• Hexagon socket head bolt
• ◆ 20 Nm
• ◆ Counter-hold using 10 mm AF key in hub. It may be necessary to reduce the key to 9.5 mm AF
• Ribbed belt

=> Allocation => Replacement part microfiche

• ◆ Correct tensioning ensured by tensioning roller
• ◆ Removing and belt routing

=> 6-Cyl. Fuel injection engine, Mechanics; Repair group 13; removing and installing ribbed belts

• Supply hose
• Hose clamp
• Sealing ring
• Hydraulic pipe
• Banjo bolt, 30 Nm

• Vane pump
• ◆ Delivery pressure: 85 ... 95 bar
• ◆ Checking =>Page 48-27
• ◆ Before installing fill with oil =>Note Page 48-110
• ◆ Checking condition

=> Maintenance

• Mounting bracket
• ◆ No longer supplied as a spare part, bracket item 1 supplied instead.
• ◆ On vehicles with air conditioner, the mounting bracket can only be removed after first removing the air conditioner mounting bracket

=> Removing and installing compressor bracket - 6-Cyl. petrol engine ▸ 08.93; Repair group 87