Volkswagen Workshop Service and Repair Manuals

• ‒ → With ignition switched on press the button below the speedo -arrow- and hold.

• ‒ → By additionally pressing the digital clock minute button -1- or the analogue clock adjusting button -2- the setting mode will be activated. OEL1.Swill appear in the odometer.

• ‒ By again pressing the button below the speedo the following display will appear one after the other: OEL2.S,IN01.S,IN02.S.

Note:

The .S stands for setting mode.

• ‒ → By pressing the analogue clock adjusting button -1- or the digital clock minute button -2- the time or distance still remaining prior to the next service will be displayed.
• ‒ By repeatedly pressing the button, the distance recorder will decrease in steps of 500 km and the time recorder in steps of 1 month. After the smallest figure the largest will follow again.
• ‒ If the ignition is switched off or engine started, the setting mode will be exited.