| –
| With engine “running”, screw in adapter for filling oil -VAS 6262/2- hand-tight. |
| –
| Pull off adapter for oil filling -VAS 6262- at quick-release connection and check: |
| If ATF now flows out of hole in adapter: |
| ATF does not need topping up. |
| –
| Drain ATF until it drips. |
| –
| Fit new seal to plug and tighten to 15 Nm. This completes the ATF check. |
| If no ATF drips out of hole in adapter: |
WARNING | An ATF level which is too low or too high will impair the function of the gearbox. But if the gearbox was 2 litres low, it must be carefully inspected. There is probably a “major” leak. |
|
|
|
|
