- Running gear
- Body
- Engine
- Vehicle electrics
- Power transmission
- Heating, ventilation, air conditioning
- Power unit
- Simos injection and ignition system
- Motronic injection and ignition system (5-cyl. engine)
- Motronic injection and ignition system (2.0 ltr. engine)
- 6-cylinder injection engine
- 4-cylinder injection engine (direct injection)
- 4-cyl. injection engine (natural gas)
- 4cyl. Injection Engine, (2.0 ltr. Engine) (Mexico)
- 4-cylinder injection engine (1.6 l roller rocker finger)
- 4-cylinder injection engine (1.6 l engine, roller rocker fingers), Mechanics
- 4-cylinder injection engine (5-valve)
- 4-cylinder diesel engine with unit injector
- Direct injection and preglow system with distributor-type pump to 04.99
- Direct injection and glow plug system with distributor pump as of 05.99
- 5-cylinder injection engine, mechanics
- 4-cylinder diesel engine, mechanics
- 4-cylinder injection engine (1.4 l and 1.6 l engine)
- Technical data
- Engine assy,cylinder block,crankcase
- Enginecrankshaft group, pistons
- Dismantling and assembling engine
- Cylinder block, sealing flange
- Assembly overview - aluminium cylinder block
- Assembly overview - cast-iron cylinder block
- Crankshaft dimensions
- Renewing crankshaft oil seal - belt pulley end
- Tightening procedure for poly V-belt pulley securing bolt
- Removing and installing pressure plate/drive plate
- Renewing crankshaft sealing flange - flywheel end
- Pressing out sealing flange with sender wheel
- Pressing in sealing flange with sender wheel
- A - Assembling sealing flange with sender wheel on assembly toolT10017
- B - Attaching assembling toolT10017 with sealing flange on crankshaft flange
- C - Bolting assembly toolT10017 onto crankshaft flange
- D - Pressing sender wheel onto crankshaft flange using assembly toolT10017
- E - Checking sender wheel installation position on crankshaft
- F - Re-pressing sender wheel
- Pistons and conrods
- Engine cylinder head, valve gear
- Engine lubrication
- Engine cooling
- Fuel supply, gas operation
- Mixture preparation system, electronic inj.,Gas
- Exhaust system
- Ignition system, glow plug system
- Heating, ventilation, air conditioning system