Golf Mk6
Assembly overview - front door |
1 - | Door |
q | Removing and installing → Chapter |
q | Adjusting → Chapter |
2 - | Window channel |
q | Removing and installing → Chapter |
3 - | Door window |
q | Removing and installing → Chapter |
4 - | Trim |
q | Removing and installing → Chapter |
5 - | Window slot outer seal |
q | Removing and installing → Chapter |
6 - | Window slot inner seal |
q | Removing and installing → Chapter |
7 - | Cover |
q | Only 2-door version |
q | Removing and installing → Chapter |
8 - | Door lock |
q | The door lock can be removed only together with the assembly carrier. |
q | Removing and installing → Chapter |
9 - | Bolt |
q | Qty. 2. |
q | Specified torque: 20 Nm |
10 - | Door joint seal |
q | Removing and installing, 2-door model → Chapter |
q | Removing and installing, 4-door model → Chapter |
11 - | Buffer |
12 - | Cover |
13 - | Assembly carrier |
q | Removing and installing → Chapter |
q | With window regulator |
14 - | Clip |
q | For securing assembly carrier |
15 - | Bolt |
q | To secure the hinge, different torque settings must be observed. |
16 - | Door lower hinge |
q | With door arrester |
q | Hinge is not the two-part design |
17 - | Bolt |
q | To secure window regulator in door |
q | Specified torque: 8 Nm |
18 - | Door upper hinge |
q | Hinge is not the two-part design |