Golf Mk6
| Assembly overview |
WARNING
|
| Grease all bearing points with polycarbamide grease -G 052 142 A2- before installing. |
| 1 - | Mounting bracket |
| q | Removing and installing → Chapter. |
| 2 - | Self-locking hexagon nut, 25 Nm |
| q | Always renew after removing. |
| q | First tighten hexagon nuts -A and B-. |
| 3 - | Noise insulation on brake pedal |
| q | Allocation ⇒ Electronic parts catalogue (ETKA) |
| 4 - | Lock washer |
| 5 - | Brake pedal |
| q | Removing and installing → Chapter. |
| 6 - | Self-locking hexagon nut, 25 Nm |
| q | Always renew after removing. |
| 7 - | Cap |
| 8 - | Bearing shell |
| 9 - | Mounting |
| q | For ball head of brake servo plunger rod. |
| 10 - | Hexagon bolt |
| 11 - | Sleeve bearing |
| 12 - | Pivot pin |