- Running gear
- Body
- Vehicle electrics
- Power transmission
- Power unit
- Heating, ventilation, air conditioning system
- Heating, air conditioning
- Heating
- Air conditioner
- Notes on repair work to vehicles with air conditioning and on handling refrigerant
- Notes for vehicles with a start-stop system
- Air conditioning system with manual regulation "Climatic" up to week 21/2011
- Air conditioning system with manual regulation from week 22/2011
- Air conditioning system with automatic regulation "Climatronic"
- Procedure for checking and adjusting components
- Function of operating and display unit for Climatronic air conditioning systemE87 with Climatronic control unitJ255
- Removing and installing operating and display unit for Climatronic air conditioning systemE87 with Climatronic control unitJ255
- Connectors on Climatronic control unitJ255
- Pin assignment for multi-pin connectors A, B and C on back of Climatronic control unitJ255
- Climatronic - passenger compartment
- Removing and installing fresh air blowerV2 on vehicles with automatic controls "Climatronic"
- Removing and installing fresh air blower control unitJ126
- Removing and installing footwell vent temperature senderG261
- Removing and installing right footwell vent temperature senderG262
- Removing and installing evaporator temperature sensorG308 or evaporator output temperature senderG263
- Ambient temperature sensorG17
- Function of air quality sensorG238
- Removing and installing air quality sensorG238
- Removing vent temperature senderG150
- Removing right vent temperature senderG151
- Removing sunlight penetration photosensorG107 or sunlight penetration photosensor 2G134
- Checking condensation water drainage hose on heater and air conditioner unitVX1
- Removing and installing glove box cooling
- Removing and installing setting unit for fresh air and air recirculation flap and air flow flap
- Overview of servomotors - air conditioning system with automatic controls "Climatronic"
- Renewing control motors for air conditioning regulation
- Removing and installing fresh air/recirculated air, air flow flap control motorV425
- Removing and installing defroster flap control motorV107
- Removing and installing left temperature flap control motorV158
- Removing and installing right temperature flap control motorV159
- Removing and installing front air distribution flap control motorV426 with potentiometer for front air distribution flap control
- Removing and installing bracket for ancillary units
- Differences in repair work for right-hand drive vehicles
- Air conditioning system with manual controls "Climatic" to WEEK 21/2011, right-hand drive
- Air conditioning system with manual controls from WEEK 22/2011, right-hand drive
- Overview of servomotors - Air conditioning system with manual controls "Climatic", right-hand drive to WEEK 21/2011
- Overview of servomotors - Air conditioning system with manual controls, right-hand drive from WEEK 22/2011
- Air conditioning system with automatic regulation "Climatronic", right-hand drive vehicles
- Overview of servomotors - Air conditioning system with automatic controls "Climatronic", right-hand drive
- Removing and installing heater and air conditioning unitVX1, right-hand drive vehicles
- Repair work on refrigerant circuit which may be performed only in appropriate workshops by specially trained mechanics
- Repair work on Golf blue e-motion refrigerant circuit which may be performed only in appropriate workshops by specially trained
- Capacities
- Auxiliary heater