Golf Mk6
Dismantling and assembling heater and air conditioner unit -VX1-„Climatronic“ |
1 - | Air intake housing |
q | With air recirculation flap and air flow flap |
q | Removing and installing → Chapter |
2 - | Control motor for fresh air and air recirculation flap and air flow flap -V425- |
q | Checking: Vehicle diagnosis, testing and information system -VAS 5051B- (or later model). |
q | Removing and installing → Chapter |
q | Renewing: initiate basic setting using vehicle diagnosis, testing and information system -VAS 5051B- (or later model) → Chapter. |
3 - | Bracket |
4 - | Upper part of evaporator housing |
q | Dismantling and assembling evaporator housing → Chapter |
5 - | Evaporator |
q | Removing and installing → Chapter |
6 - | Defroster flap control motor -V107- |
q | Checking: Vehicle diagnosis, testing and information system -VAS 5051B- (or later model). |
q | Removing and installing → Chapter |
q | Renewing: initiate basic setting using vehicle diagnosis, testing and information system -VAS 5051B- (or later model) → Chapter. |
7 - | Right temperature flap control motor -V159- |
q | Checking: Vehicle diagnosis, testing and information system -VAS 5051B- (or later model). |
q | Removing and installing → Chapter |
q | Renewing: initiate basic setting using vehicle diagnosis, testing and information system -VAS 5051B- (or later model) → Chapter. |
8 - | Evaporator temperature sensor -G308- or evaporator output temperature sender -G263- |
q | Checking: Vehicle diagnosis, testing and information system -VAS 5051B- (or later model). |
Note
One of the two component designations appears depending on software. The functions are identical. |
q | Removing and installing → Chapter |
9 - | Air distribution housing |
q | Removing and installing → Chapter |
10 - | Auxiliary air heater element -Z35- |
q | Only fitted on vehicles with a diesel engine. |
q | Checking: with vehicle diagnosis, testing and information system -VAS 5051B- (or later model), under Heating, ventilation, air conditioning; Systems capable of self-diagnosis; Auxiliary heating; Electrical components. |
q | Removing and installing → Chapter. |
11 - | Heat exchanger |
q | Removing and installing → Chapter |
12 - | Heat exchanger trim |
13 - | Cover |
q | For dust and pollen filter. |
14 - | Left temperature flap control motor -V158- |
q | Checking: Vehicle diagnosis, testing and information system -VAS 5051B- (or later model). |
q | Removing and installing → Chapter |
q | Renewing: initiate basic setting using vehicle diagnosis, testing and information system -VAS 5051B- (or later model) → Chapter. |
15 - | Dust and pollen filter |
q | With activated charcoal filter |
q | Removing and installing → Chapter |
16 - | Fresh air blower -V2- with fresh air blower control unit -J126- |
q | Checking: Vehicle diagnosis, testing and information system -VAS 5051B- (or later model). |
q | Removing and installing fresh air blower -V2- → Chapter |
q | Removing and installing fresh air blower control unit -J126- → Chapter |
17 - | Cooling hose for glove compartment cooling |
q | To remove, glove compartment must be removed → General body repairs, interior; Rep. gr.68 |
q | Installation position of connections for glove compartment cooling → Fig. |
18 - | Connections for glove compartment cooling |
q | To remove, glove compartment must be removed → General body repairs, interior; Rep. gr.68 |
19 - | Front air distribution flap control motor -V426- with potentiometer for front air distribution flap control motor -G642- |
q | Checking: Vehicle diagnosis, testing and information system -VAS 5051B- (or later model). |
q | Removing and installing → Chapter |
q | Renewing: initiate basic setting using vehicle diagnosis, testing and information system -VAS 5051B- (or later model) → Chapter. |
20 - | Lower part of evaporator housing |
q | Dismantling and assembling evaporator housing → Chapter |
|