Golf Mk6
Removing and installing cover for gearbox housing and 5th gear |
1 - | Gearbox housing |
2 - | Gear wheel for 5th gear |
q | Installation position → Anchor |
3 - | Retaining ring |
q | Renew |
q | Determining thickness → Anchor |
4 - | Seal |
5 - | Gearbox housing cover |
If gearbox housing cover is installed with gearbox installed, check oil level and top up with gear oil → Chapter. |
6 - | Bolt, 5 Nm + turn 90° further |
q | Always renew |
7 - | Retaining ring |
q | Renew |
q | Determining thickness → Anchor |
8 - | Synchro-hub with locking collar and stop ring for 5-speed gearbox |
q | Dismantling and assembling → Chapter |
9 - | Synchro-ring for 5th gear |
10 - | Synchromeshed gear for 5th gear |
11 - | Needle bearing |
q | For 5th gear |
12 - | 5th gear selector fork |
q | Dismantling and assembling → Chapter |
13 - | Pivot pin |
q | For 5th gear selector fork. |