| Removing and installing valve body |
WARNING | Do not run engine or tow vehicle with pan removed or when there is no ATF in gearbox. |
|
| t
| The valve body and the wiring harnesses can also be removed when the gearbox is installed. |
| t
| Moisten seals with ATF before fitting. Other lubricants lead to malfunction of the gearbox hydraulics. |
| t
| Always renew a valve body which is fouled or defective. |
| t
| Do not use fluffy cloths. |
| t
| After the pan has been installed, the ATF level must be checked and topped up → Chapter. |
|
|
|
