–
| Dip the injectors together with the mounting plate for injection modules -VAS 6418/1- into the cleaning fluid. |
–
| Set a temperature of 50 degrees with the rotary knob -4-. |
–
| Set the rotary knob -5- to a cleaning time of 30 minutes. |
–
| Switch the ultrasonic unit on with button -3-. |
Note As soon as the cleaning temperature is 50 degrees, the set time will begin to elapse. |
–
| After cleaning, always replace the combustion chamber ring seal (Teflon seal) for each injector → Chapter. |
|
|
|