- Running gear
- Body
- Vehicle electrics
- Power transmission
- Power unit
- 4-cylinder injection engine (1.6 l roller rocker finger)
- 4-cylinder injection engine (1.4 l engine)
- 4-cylinder injection engine (1.4 l direct injection engine, turbocharger)
- 4-cylinder diesel engine (2.0 l engine, common rail)
- 4-cylinder injection engine (1.8 and 2.0 l engine, chain drive)
- 4-cylinder injection engine (1.4 l direct injection engine, turbocharger and supercharger)
- 4-cylinder diesel engine (1.6 l engine, common rail)
- Technical data
- Engine assy,cylinder block,crankcase
- Enginecrankshaft group, pistons
- Cylinder block (pulley end)
- Cylinder block, gearbox end
- Assembly overview - cylinder block, gearbox end
- Removing and installing flywheel (vehicles with dual-mass flywheel)
- Assembly overview - removing and installing flywheel (vehicles with single flywheel)
- Removing and installing sealing flange on gearbox side
- Pressing out sealing flange with sender wheel
- Pressing in sealing flange with sender wheel
- a) Securing seal with sender wheel on assembly toolT10134
- b) Securing assembling toolT10134 with sealing flange on crankshaft flange
- c) Bolting assembly toolT10134 onto crankshaft flange
- D - Pressing sender wheel onto crankshaft flange using assembly toolT10134
- E - Checking sender wheel installation position on crankshaft
- F - Re-pressing sender wheel
- Crankshaft
- Pistons and conrods
- Engine cylinder head, valve gear
- Engine lubrication
- Engine cooling
- Exhaust turbocharger, G-charger
- Fuel preparation system Diesel injection
- Exhaust system
- Ignition system, glow plug system
- 4-cylinder injection engine (1.2 l direct injection engine, turbocharger)
- 4-cylinder diesel engine (2.0 l engine, common rail, generation II)
- 4-cylinder injection engine (2.0 l engine, turbocharger) Volkswagen R GmbH
- Fuel supply system - Diesel engines
- Fuel supply system - Petrol engines
- 4-cyl. direct injection engine (2.0 l 4V turbocharger, toothed belt drive)
- Heating, ventilation, air conditioning system