Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Securing engine on engine and gearbox support >
< Separating engine from gearbox
Golf Mk6
Power unit
4-cylinder diesel engine (2.0 l engine, common rail, generation II)
Engine assy,cylinder block,crankcase / Removing and installing engine / parating_engine_and_gearbox/">Separating engine and gearbox
Separating engine from dual clutch gearbox
Separating engine from dual clutch gearbox
Separating engine from dual clutch gearbox
Special tools and workshop equipment required
t
Adapter -10 - 222 A /20-
t
Hook -2024 A /1- of lifting tackle -2024 A-
t
Workshop hoist -VAS 6100-
Procedure
l
Engine/gearbox assembly removed and attached to engine bracket -T10012-.
–
Remove coolant hoses from gearbox oil cooler, loosen hose clips
-arrows-
for this.
–
Attach hook of lifting tackle -2024 A- to gearbox lifting eye and secure with pin
-arrow-
.
–
Attach workshop hoist -VAS 6100- to lifting tackle with adapter -10 - 222 A /20-.
–
Free wiring harnesses
-arrows-
and electrical connector
-1-
at bracket.
–
Unscrew bolts
-1-
and
-2-
and remove starter from gearbox.
–
Unscrew remaining bolts
-1, 3, 5, 6, 7, 8, 9, 10-
from gearbox to engine connection.
Note
t
Bolt
-3-
is only accessible after removing starter.
t
Ignore
-items 2, 4-
and
-A-
.
–
Pull gearbox off engine.
Power unit
4-cylinder diesel engine (2.0 l engine, common rail, generation II)
Engine assy,cylinder block,crankcase / Removing and installing engine / parating_engine_and_gearbox/">Separating engine and gearbox
Separating engine from dual clutch gearbox
Securing engine on engine and gearbox support >
< Separating engine from gearbox