Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing ancillary bracket >
< Removing and installing tensioner for poly V-belt
Golf Mk6
Power unit
4-cylinder diesel engine (2.0 l engine, common rail, generation II)
Enginecrankshaft group, pistons / Cylinder block (pulley end) / moving_and_installing_tensioner_for_poly_v-belt/">Removing and installing tensioner for poly V-belt
Removing and installing poly V-belt tensioner
Removing and installing poly V-belt tensioner
Removing and installing poly V-belt tensioner
Removing
–
Remove poly V-belt
→ Chapter
.
–
Loosen clip
-2-
, raise retaining clip
-1-
and remove connecting hose on
»cold side«
.
–
Remove cowling together with radiator fan -V7- and radiator fan on right of radiator -V35-
→ Chapter
.
–
Unscrew securing bolts
-arrows-
from charge air pipe and detach connector
-1-
from charge pressure sender -G31-.
–
Open clip
-2-
, expose coolant hose
-3-
and remove charge air pipe.
–
Unscrew securing bolt
-2-
and remove tensioning element for poly-V belt
-1-
.
Installing
Install in reverse order. In the process, note the following:
t
Renew bolt for tensioning element
t
Specified torques
→ Chapter
.
t
Install poly V-belt
→ Chapter
.
Power unit
4-cylinder diesel engine (2.0 l engine, common rail, generation II)
Enginecrankshaft group, pistons / Cylinder block (pulley end) / moving_and_installing_tensioner_for_poly_v-belt/">Removing and installing tensioner for poly V-belt
Removing and installing poly V-belt tensioner
Removing and installing ancillary bracket >
< Removing and installing tensioner for poly V-belt