volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Correcting front axle camber > < Wheel alignment specifications

Golf Mk6

Overview - wheel alignment procedure
Overview - wheel alignment procedure
Always adhere to the following procedure!
   
–  Observe instructions for your wheel alignment device.
  N01-0453
Alignment procedure
         
 Start→Carry out wheel runout compensation.→Bounce springs. 
       ↓ 
 Turn steering wheel to straight-ahead position and lock in place 1)←Measure vehicle height. ←Fit brake pedal depressor -V.A.G 1869/2- 
  ↓      
 Check front axle camber→Is actual value within tolerance?→No 
     ↓ ↓ 
  ↓←←Yes Adjust → Chapter. 
  ↓    ↓ 
  ↓←←←←← 
  ↓      
 Check rear axle camber→Is actual value within tolerance?→No 
     ↓ ↓ 
  ↓←←Yes Adjust → Chapter. 
  ↓    ↓ 
  ↓←←←←← 
  ↓      
 Check rear axle toe→Is actual value within tolerance?→No 
     ↓ ↓ 
  ↓←←Yes Adjust → Chapter. 
  ↓    ↓ 
  ↓←←←←← 
  ↓      
 Check front axle caster→Is actual value within tolerance?→No 
     ↓ ↓ 
  ↓←←Yes Inspect axle components and body 
  ↓    ↓ 
  ↓←←←←← 
  ↓      
 Check front axle toe→Is actual value within tolerance?→No 
     ↓ ↓ 
 End←Yes Adjust → Chapter. 
  ↑    ↓ 
  ↑←←←←← 

1) If steering wheel is not centred, it must be straightened after wheel alignment is finished. Then perform basic settings for steering angle sensor -G85- using vehicle diagnosis, testing and information system -VAS 5051-.
   

Correcting front axle camber > < Wheel alignment specifications