volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Notes on operating mobile telephones and two-way radios > < General description

Golf Mk6

Magnetic field sender for compassG197
Magnetic field sender for compass -G197-
The magnetic field sender for compass -G197- is secured on the rear of the roof near the roof end strip.
Removing
–  Switch off ignition and all electrical consumers and remove ignition key.
–  Lower rear section of headliner → General body repairs, interior; Rep. gr.70.
   
–  Remove magnetic field sender for compass -G197--1- from roof using a small screwdriver.
–  Release and detach connector -2- and remove magnetic field sender for compass -G197--1-.
Installing
The magnetic field sender for compass -G197- is delivered with adhesive film.
–  Clean adhesive film on roof.
  M91-10004
–  Connect connector -2- to magnetic field sender for compass -G197--1-.
–  Remove adhesive film on magnetic field sender for compass -G197-.
  M91-10004
Magnetic field sender for compass -G197- must be aligned with edge of roof end strip -4- and marking -3-.
–  Press magnetic field sender for compass -G197--1- firmly onto adhesive film.
Remainder of installation is carried out in reverse order of removal.
–  Recalibrate compass system.
  M91-10004

Notes on operating mobile telephones and two-way radios > < General description