volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Fuse/Relay Panel, Removing and Installing|Page 7436 > < Component Locations|Page 7433
Page 1
background image

Relay Box: Service and Repair
Fuse/Relay Panel, Removing and Installing

CAUTION:  See: Service Precautions  

NOTE:  The fuse/relay panel is located under the left side of the instrument panel.

Removal and Installation

-

Remove lower instrument panel trim.

-

Spread retaining clips -1- and disengage lock pins -2- from brackets -4-.

-

Swing retaining clips -1- forward and pull from fuse/relay panel pins -3-.

-

Spread left retaining bracket -4- and disengage from pin -5-.

-

Lift fuse/relay panel from brackets -4-.

-

Remove multi-point connectors from back of fuse/relay panel and remove fuse/relay panel.

-

Install in reverse order of removal. Make sure pin -5- and retaining pins -2- engage recesses in brackets -4-.

Fuse/Relay Panel, Removing and Installing|Page 7436 > < Component Locations|Page 7433