volkswagen Workshop Repair Guides

Volkswagen Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Relay Box: Service and Repair
Multi-Pin Plug Behind Relay Plate, Removing and Installing

NOTE:  For wire connector identification on back of fuse/relay panel, see Wiring Diagrams.

Multi Pin Plug, Removing:

-

Pull open locking slide -1- on back of fuse/relay panel in direction indicated (arrow).

-

Depress locking clip (arrow) and pull multi-point connector from fuse/relay panel.

Installing:
-

Insert connectors so that locking pins -2- face locking slide -1-.

-

Push multi-point connector into appropriate location -4- unlocking clip -3- engages.

-

When all connectors are installed, push locking slide -1- direction indicated (arrow) until locked.

NOTE:  Fully insert all multi-point connectors into fuse/relay panel before engaging locking slide -1-.

Starting and Charging > Power and Ground Distribution > Relay Box > Component Information > Service and Repair > Fuse/Relay Panel, Removing and Installing > Page 7436

< PREV PAGE NEXT PAGE >