GTI L4-2.0L Turbo (BPY) (2007)
-
Secure electrical connection -1- by engaging lock -2- in direction of -arrow-.
NOTE: After installing a new Headlamp Range Control Module J431, it must be coded.
Headlamp Range Control Module J431, coding
-
Connect Vehicle Diagnostic, Testing and Information System VAS 5051/5052
-
Connect Vehicle Diagnostic, Testing and Information System VAS 5051/5052
-
Select operating mode "Guided Fault Finding"
-
Enter information as prompted and press ">" to confirm.
After the DTC memory of all control modules has been checked:
-
Use "Go to" button to select "Function / Component Selection"
-
Select "Body"
-
Select "Electrical system int/ext"
-
Select "01 - Self-diagnosis"
-
Select "Automatic vertical headlight aim control"
-
Select "Functions"
-
Select "Coding automatic vertical headlight aim control"
-
Follow tester prompts
NOTE: After coding Headlamp Range Control Module J431, headlamp basic setting must be performed.