Jetta Sedan L5-2.5L (CBTA) (2009)
/Page-1646002.png)
-
Insert washers - 2 - onto bolt head - 1 -.
-
Tighten the nuts - 1 - to the tightening specification. Refer to --> [ Fastener Tightening Specifications ] See: Specifications.
-
Connect connector - 2 - onto lamp carrier.
-
Check the gap dimension to the body after installing the tail lamp assembly.
Taillamp Bulb Carrier In Rear Lid, Sedan
Rear Lamps
Taillamp Bulb Carrier in Rear Lid, Sedan
CAUTION!
‹› Turn off the ignition and all electrical consumers.
‹› Remove ignition key.
Removing
-
Unclip service cover from trim in rear lid.
-
Disconnect connector - 2 -.
