Passat (B3)
| Repairing central locking system (estate) |
| 1 - | Fuel filler flap positioner |
| q | To remove, rear right luggage compartment trim must be removed and front right luggage compartment trim must be released in rear area → Chapter. |
| q | Removing and installing → Chapter |
| 2 - | Foam tube |
| 3 - | T distributor element |
| q | Fitting location: tank flap positioning element |
| 4 - | Rear lid positioning element |
| q | To remove, first remove rear lid trim → Chapter |
| 5 - | Spiral grommet |
| 6 - | Rear door positioning element |
| q | Removing and installing → Chapter |
| 7 - | Pipe connector |
| q | Fitting location: in connector between door and pillar |
| 8 - | Front door positioning element |
| q | Removing and installing → Chapter |
| 9 - | T distributor elements |
| q | Installation position: B pillar / side member, covered by entry strip. |
| 10 - | Dual pressure pump |
| q | Fitting location: recess in rear right vehicle floor |
| 11 - | T distributor element |
| q | Fitting location: behind right wheel housing |
| 12 - | T distributor element |
| q | Fitting location: wheel housing/backrest, concealed by front luggage compartment trim |
