Passat (B3)
Repairing central locking system (saloon) |
1 - | Fuel filler flap positioner |
q | To remove, the luggage compartment trim must be detached first of all up to wheel house. |
q | Removing and installing → Chapter |
2 - | Positioning element - rear lid |
q | Removing: loosen cross-head screws on positioning element and unclip link rod |
3 - | T distributor elements |
q | Fitting location: wheel housing/backrest, concealed by luggage compartment floor covering |
4 - | Dual pressure pump |
q | To remove, the luggage compartment trim must be detached first of all up to wheel house. |
q | Installing → Chapter. |
5 - | T distributor element |
q | Fitting location: dual pressure pump |
6 - | Rear door positioning element |
q | Removing and installing → Chapter |
7 - | Pipe connector |
q | Fitting location: in connector between door and pillar |
8 - | T distributor elements |
9 - | Front door positioning element |
q | Removing and installing → Chapter |