| –
| Cut back remaining material on window flange using scraper -V.A.G 1561/8-, but do not remove completely under any circumstances. |
Note | Remaining material serves as adhesion base for newly applied adhesive sealing compound. Keep dirt and grease off of bonding surfaces. |
WARNING | Do not prime adhesion surface, do not activate and do not treat with cleaning solution. Keep adhesion surface free of dirt and grease. |
|
| Exception: if bonding is not performed immediately after cutting back, the remaining residual material must be activated with activator -D 181 801 A1-. |
WARNING | Activator -D 181 801 A1- should not come into contact with paintwork, otherwise finish will be damaged. |
|
| t
| If the window flange has been repaired or partially renewed, after painting, the area concerned must be cleaned and primed again. |
|
|
|
