volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing moulded headliner with sliding/tilting roof (saloon) > < Removing
Installing
   
Installing
–  Check foam strip -1- on roof is attached securely, rectify bond as necessary.
–  Align moulded headliner at front to sun visor mountings -6-, at rear to centre marking -3- and recess -2-.
–  Secure moulded headliner at front with sun visors.
–  Insert clips -5-, moulded headliner is held in position by clips.
–  Push end strip -4- in roof frame.
–  Fit attachments.

   

Removing and installing moulded headliner with sliding/tilting roof (saloon) > < Removing