Volkswagen Workshop Service and Repair Manuals

•      1 -     Blower speed indicator
• Displays a medium speed in automatic operation -7-, independent of actual blower speed.
•      2 -     Ambient temperature indicator
• Ambient temperature is measured by ambient temperature sensor -G17-. In event of failure, temperature sensor in fresh air intake duct -G89- takes over the function. If both temperature sensors fail, "--" appears in the display.
• If road speed drops to below 5 km/h, the value displayed will not change. The actually measured value is not displayed as this is affected by heat from the engine at low speeds.
•      3 -     Windscreen defrost indicator
•      4 -     Air recirculation indicator
•      5 -     Air flow direction indicator

•      6 -     Selected interior temperature
•      7 -     Vehicles up to 07.95:
  Display "AUTO" (automatic operation) or "OFF" (system off)
  Vehicles from 08.95:
  "AUTO" (automatic operation) or "ECON" (compressor only switched off)
•      8 -     "Automatic operation" button
•      9 -     "Blower speed higher" button
•      10 -     "Blower speed lower" button
  (the system is also switched off with this button)
•      11 -     "Defrost windscreen" button
•      12 -     "Air recirculation" button
•      13 -     "Air flow to upper body" button
•      14 -     "Air flow to foot well" button
•      15 -     Celsius/Fahrenheit selector button
•      16 -     "Warmer" button

•      17 -     "Colder" button
•      18 -     Vehicles up to 07.95:
  OFF button for " System on/off"
  Vehicles from 08.95:
  ECON button for "Switching compressor on/off"

Notes:

• ◆ The automatic operation of the Climatronic can be influenced with buttons 9 - 14.
• ◆ When deviating from automatic operation the display "AUTO" -7- will disappear; the control of the Climatronic continues to function under the programmed restrictions.
• ◆ Returning to automatic operation is only possible by pressing button -8-.
• ◆ On vehicles from 08.95 the Climatronic can only be completely switched off with button 10.
• ◆ In ECON operation only the compressor is switched off, the heating and ventilation operation continues to be controlled electronically.