• Running gear
• Body
• Vehicle electrics
• Power transmission
• Automatic gearbox 01M from January 1995
• 5-Speed manual gearbox 02A
• 5 Speed Manual Gearbox 02C four wheel drive
• Technical data
• Clutch, control
• Gearbox mechanics,operation, construction,diff.
• Gearbox,mechanics,gears,shafts,internal operation
• Final drive, differential, differential lock
• Renewing left-hand flange shaft or right-hand drive flange oil seals (gearbox installed)
• Renewing bevel box output flange oil seal (bevel box removed)
• Dismantling and assembling differential
• Adjustment overview
• Adjusting differential
• Dismantling and assembling bevel box
• Adjusting shaft bevel gear and bevel gear (gear set)
• General notes
• Adjusting and marking of gear sets
• Position of shims
• Adjustment overview (bevel box)
• Recommended sequence for adjusting gear set
• Determining shim "S4" thickness when replacing output flange
• Adjusting shaft bevel gear
• Adjusting bevel gear
• Removing and installing propshaft
• Servicing propshaft
• Checking function of viscous coupling
• Removing and installing viscous coupling
• Removing and installing viscous coupling oil seal in rear final drive (final drive installed)
• Removing and installing drive flange oil seal (rear final drive installed)
• Functional check of free-wheel
• Functional check of free-wheel lock
• Removing and installing rear final drive
• Checking rear final drive oil
• Dismantling and assembling rear final drive
• Dismantling and assembling differential and freewheel (assembly overview)
• Dismantling and assembling differential (sequence)
• Removing and installing freewheel (sequence)
• Dismantling and assembling freewheel (sequence)
• Adjusting bevel gear and shaft bevel gear (gear set)
• Power unit
• Heating, ventilation, air conditioning system