Passat (B3)
Dismantling and assembling selector forks
Dismantling and assembling selector forks
|
|
→ Fig.1 Identifying selector segments Dimension -a- 1 - 1st and 2nd gear selector segments = 12.1 mm 2 - 3rd and 4th gear selector segments = 7.7 mm 3 - 5th gear selector segments = 12.1 mm |
→ Fig.2 Installing circlip
Note: After installing the circlip the selector segment must rotate freely. A - Socket, 10 mm A/F B - Vice clamps |
→ Fig.3 Removing bearing inner race Note: When removing and installing the inner races do not bend selector forks. |
→ Fig.4 Pressing inner race in onto stop |
→ Fig.5 Selector fork with selector segments installed
Selector segment assignment => Fig.1 . |